207-CUHD1: Mit Drucker und Kabel 3 Kanal EKG
207-CUHDIV1: Mit Druckerkabel 3 führt EKG, SpO2, und Herzschrittmacher.
207-CUHDIV2: Mit Drucker-Kabel, 12-Kanal-EKG, SpO2, und Herzschrittmacher.
207-CUHDIV3: Mit Drucker-Kabel, 12-Kanal-EKG, SpO2, NIBP, und Herzschrittmacher.
Defibrilation per Wellenform e-cube bipasisch (Truncated Exponential Typ)
PNI, SpO2, ECG Überwachung (12 deriv) mit Speicher und Tendenzen.
Äussere Herzschrittmacher
Integriertes DEA und Drucker.
1. Product overview
LifeGain CU-HD1 – this is the company’s high end defibrillator/monitor intended for hospital use. It has defibrillation capabilities in AED and manual modes and may use disposable electrode pads and external and internal paddles for shock delivery. It has a transcutaneous pacer for temporary pacing of patients with low heart rate. It has an SPO2 module for the monitoring of oxygen saturation in the patient’s blood and a 12-lead ECG monitor for the evaluation and monitoring of the patient’s ECG.
It has a memory card port for the storage of acquired signals and an integrated printer for the generation of hard copies of the patient’s physiological signals. These features make this defibrillator suitable for use inside a hospital.
This product is a defibrillator designed for qualified emergency staff and medical professionals to deliver defibrillating shocks to victims of sudden cardiac arrest and restore the normal ECG rhythm.
* AED Mode
AED Mode is delivered to patients who are exhibiting the symptoms of Sudden Cardiac Arrest (SCA) including ventricular fibrillation, ventricular tachycardia, in order to bring them back to life by delivering electric shock and restoring the normal ECG rhythm.
In the AED mode, defibrillation pads must be used. These defibrillation pads work to obtain the ECG signal of patients and deliver electric shock according to the patients' condition.
* Manual Mode
Manual Mode is divided into two functions such as asynchronous defibrillation and synchronous cardioversion. In asynchronous defibrillation, the usage target is the same in AED Mode.
For the asynchronous defibrillation treatment in the manual mode, the user is able to choose the level of electric shock energy from the range of 1-200 joule by the use of pads or paddles.
On the other side, when used for synchronous cardioversion, it is used on patients with the symptoms of atrial fibrillation. It is designed to analyze the R-wave of ECG QRS and deliver R-wave synchronized electric shocks.
In the Manual mode, synchronous cardioversion treatment can be delivered to patients with rapid atrial fibrillation, ventricular tachycardia, and cardiac ischemia.
* Pacer Mode
Pacing is a method applied to patients who had lost natural cardiac movement functions, mostly used on patients with bradycardia. LiFEGAIN CU-HD1 functions to support non-invasive pacing, a way of helping maintain a patient’s pulse by attaching its electrode to the patient’s skin and delivering artificial electric stimulation to the heart. Pacing mode is divided into the 'Fixed mode' and the 'Demand mode'.
* Monitoring Mode
Patient monitoring mode features the ECG monitoring function and the function to measure the level of SpO2, functional oxygen saturation in the blood.
For the ECG monitoring function, you can discriminatingly use the 3-lead, 5-lead, 12-lead ECG cables. During the patient monitoring session, it is possible to analyze the ECG results to use the alarming function according to the conditions such as the number of pulses, ventricular fibrillation or ventricular tachycardia etc. If using an ECG cable, convert "Rotary Switch" to "Monitor mode" before usage.
2. Key features
* Manual and AED Operation
* Defibrillation using paddles or pads
* Synchronized cardioversion
* Efficient and effective e-cube Biphasic technology (BTE Type)
* SpO2 pulse oximetry with alarm
* ECG monitoring (3 Lead ECG / 5 Lead ECG / 10 Lead ECG)
* Noninvasive pacing mode
3. Product specification
Display
LCD Dimension
7 inch Diagonal (152mm * 91mm)
Type
TFT Color
Resolution
800 * 480 pixels
Defibrillation
Defib Common
Waveform
Truncated Exponential Biphasic (e~cube)
Charge Time
Adapter : Less than 5 seconds to 200 Joules / Battery : Less than 7 seconds to 200 Joules
AED Mode
Output Energy
200 J
Shock Delivery
Via multifunction defib electrode pads
AED Develop Guideline
Shock advisory sensitivity and Specificity meet AAMI DF-80 guidelines
Voice & Text Prompt
Guide the user through the protocol via multifunction defib electrode pads
Recorder can be configured to print marked event, charge, shock and alarms
Printing Speed
25 mm/s
Paper
50 mm Width / 40 mm Diameters
Automatic Self-Test
* Power on Self-Test
* Run Time Self-Test
* Manual Self-Test
* Periodic Self-Test (Daily/Weekly/Monthly)
Power Source
External Battery Pack : Lithium Polymer
Type
14.8 V 3.1 Ah (Rechargeable)
Capacity
When new, minimum of 100 shock deliveries ( 200 J )
AC Power Pack
Output
18 V, 6 A
Noninvasive Pacing
Waveform
Monophasic Truncated Exponential
Mode
Demand and Fixed Mode
Amplitude Accuracy
0 ~ 200 mA ( 5 mA )
Pulse Width
20 ms (1.5 %)
Pulse Rate
30 ~ 180 ppm ( 1.5 % )
Refractory Period
340 msec ( 30 to 80 ppm ) / 240 msec ( 90 to 180 ppm )
SpO2 Pulse Oximetry
Saturation
70 ~ 100 % ( 3 digits )
Pulse Rate
20 ~ 250 bpm ( 3 bpm )
Perfusion
0.2 %
Module Manufacturer
Nellcor
SpO2 Alarm
Less than Minimum setting rate, over than Maximum setting rate
Data Storage
External memory card
SD Card (ECG data, Evend, Voice)
ECG Monitoring
Input
3-Lead Cable : I, II, III / 5-Lead Cable : I, II, III, aVR, aVL, aVF or V / 10-Lead Cable : I, II, III, aVR, aVL, aVF or V1, V2, V3, V4, V5, V6 / (Display View:All 12-Lead ECG waves display simultaneously)
Lead Fault
“Lead Fault” message and dashed line display, if an electrode or lead wire becomes disconnected
Heart Rate Display
30 to 300 bpm ( 3 bpm )
ECG Size
5, 10, 20 mm / mV and Auto-gain
Heart Rate / Arrhythmia Alarm
HR, Asystole, VF, V
4. Accessories
* Standard Package
1. Device
2. External Paddle (Reusable) - Pediatric included Power cord
3. 3-Lead ECG Cable
4. ECG Electrodes (15EA)
5. Disposable Defi Pads & Adapter for Defi pads
6. Built in Printer
7. Power Cord & SMPS (Switching Mode Power Supply)
8. Internal Battery (Lithium Polymer)
9. Gel
10. User’s Guide
* Optional Accessories
11. Carrying Case
12. SD Card / SD Card Reader
13. Pediatric Defi Pads (Disposable)
14. 5-Lead ECG Cable (Button Type)
15. ECG Electrodes (50EA)
16. Printer Paper (10 rolls)
17. Cigar Lighter Jack for Car
18. Bed Hanger
19. SpO2 Module Set (MP100, Finger Probe, Exention Cable)
20. Pacer
21. 12 Lead ECG Cable
35-45 T
